Fusion Glazes are excellent for faux finishes on furniture or walls.
East to use, dries to a soft matte finish
 
For high-traffic areas, we recommend a topcoat.
 
Antiquing Glaze is lightly tinted to a rich brown for the perfect antiquing look.
 
Clear Glaze can be custom tinted with our paint or metallics.
 
Application Tool: Brush, Sponge, Rag
Re-coat Time: 12-24 hrs
Dry Time: 12 hrs
Top Coat: Required on surfaces that will come into water contact such as cabinets. Any topcoat can be applied.
Clean Up: Water
Cure Time: 28 Days 
HOW TO USE IT?
You can apply liberally with a brush of your choice, then gently wipe back with a lint-free cloth to achieve the desired effect. If there are detailed crevices, this is where the glaze will really show its glory! If too much force is used, it may reactivate the paint layer below as the glaze has high water content.
For areas with lots of water contact, like kitchen cabinets or table tops, allow the glaze to dry for 24-48 hours before applying a top coat using our Tough Coat or Gel Stain.
TIP: If adding tint or paint to the clear glaze, test to ensure your desired pigmentation is achieved prior to application by doing a test patch.